Picked up this weapon from Connecticut this weekend, which apparently has been called "the nicest 848 in the USA." Dynoed at 158hp, this Ducati 848 actually houses a 1098 engine, reinforced with 1198 rods and bearings by the legendary Ducshop in Marietta, Georgia.
In addition to Termignoni cans,
this track-day weapon sports Ohlins suspension, both front and rear, as well as an Ohlins steering dampener sitting behind a custom adjustable triple clamp.
Woodcraft engine and clutch covers protect the engine block
a Ducabike slipper clutch,
and Woodcraft rearsets and hand guards protect me and the bike in a crash.The engine was built with a programmable MicroTech ECU,
and came with spare wheels, a tank and two sets of Armor Bodies body work,
and numerous other spares.
There is nearly nothing I can do with this bike,
except maybe give it a wash, maybe peel off some of the vinyl,
and wait until track season.
Here is the bike on the dyno.
Engine:
2007 Ducati 1098 (Built by Ducshop) - 158hp / 90ft-lbs on Pump Gas.
1198 Rod and Main Bearings
ARP Rod Bolts
Shimmed Transmission
Cams Degreed
New Belts
Termignoni Carbon Slip-ons
Ducabike SBK Slipper Clutch (48th Basket)
BMC Air Filter
Motul 300V with New OEM Filter
Chassis:
NEW Ohlins Steering Damper
Podium Racing Adjustable Triple Clamps with (6) Insert Sets
Sato Racing Ride Height Adjuster
Tapered Steering Head Bearing Kit
Speedymoto “Underbody” Frame Sliders
AFAM Quick Change Sprocket Set-up with spare gearing.
DID ERV3 520 Chain
Magnesium Upper Cowl Brace
Tank Stomp Grip
Zero Gravity Double Bubble SBK Screen
NEW Tape Works Rim Strips
NEW Armor Bodies SBK bodywork with fresh paint.
Armor Bodies SBK Air Ducts
NEW Drippen Wet “Blank” Number Plates
Brakes:
Brembo RCS Master with folding leaver
1 into 2 Braided Steel Lines
Ti Cross Drilled Banjo Bolts
Ti Cross Drilled Caliper Bolts
New Brembo Race Pads
Motul 600RF fluid
Suspension:
Refreshed (New seals and oil) 1/15/17 by KWS Motorsports
Ohlins 30mm Cartridge Kit (.95 Springs)
Ohlins TTX MKII Shock (1.0 Spring)
Electronics:
Microtec M97 Stand Alone Engine Management with Cable and Software.
Microtec Quick Shifter (GP Shift)
Motion Pro Right Side Switch
Woodcraft Ignition Delete Kit
NEW Ballistic EVO3 EVX16-12 Lithium Battery
NEW Ballistic EVO Health Monitor
NEW Ballistic EVO Advanced Charger
Controls:
NEW Woodcraft Clip-Ons
NEW Woodcraft Lever Guards (Both Sides)
NEW Woodcraft Rear Sets
NEW Motion Pro REV2 Throttle with Muliple Reals
NEW Motion Pro Grips
NEW CRG GP Clutch Lever
Spares:
NEW Pit Bull “One Arm” Rear Stand
OEM Wheels complete set
Front and Rear Dunlop GPA Slicks (4 Lap on them)
OEM Fuel Tank w/ Fuel Pump (Black)
Armor Bodies Upper and Lower (slight rash, totally repairable)
Woodcraft Rear Sets
Woodcraft Clip-On Bar
Rear Sprockets (41t, 40th, 39th, 38th)
Front Sprockets (14th X 2, 15th, 16th)
Ducati Corsa Throttle Assembly with Cables
Triple Clamp Offset Inserts (0,1,2,3,4,5)
Speedymoto Axle Slider Kit
OEM Clip-Ons
OEM Clutch Lever
OEM Steering Damper
OEM Link
OEM Right Switch Gear
OEM Sprocket Cover
OEM Belt Covers
OEM Oil Strainer
OEM Fuel Filter
OEM Clutch Fiber and Steel assembly
OEM Clutch Assembly (X 2)
OEM Fans
OEM Taillights
© 2018 Tigh Loughhead
0 comments :